M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC

M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC


Get M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC


This is without watch accessories,If you like with watch accessories

Description:

M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do? This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.

Item Features:

- 5V DC power supply
- USB Type-C
- ESP32-based
- 4 MByte Flash
- 6- IMU MPU6886
- Red LED
- Buzzer
- IR transmitter
- 1 Buttons, OLED(1.3 inch), 1 Reset
- 2.4G Antenna: Proant 440
- 95 mAh Lipo Battery
- Extendable Socket
- Grove Port
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython,  for

ESP32 Features:

- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth
- Hall sensor
- 10x capactive touch interface
- 32 kHz crystal oscillator
- PWM/timer input/output available on every GPIO pin
- SDIO master/salve 50MHz
- card interface support

PinMap:

RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32GPIO10GPIO9GPIO37GPIO39
RED LEDLED PIN


IR Transmitter
Transmitter Pin

Button A

Button Pin
Button B


Button Pin

TFT LCD
Driver IC:ST7735S
Resolution:80 * 160

ESP32GPIO15GPIO13GPIO23GPIO18GPIO5
TFT LCDTFT_MOSITFT_CLKTFT_DCTFT_RSTTFT_CS

GROVE PORT
ESP32GPIO33GPIO325VGND
GROVE portSCLSDA5VGND

MIC (SPM1423)
ESP32GPIO0GPIO34
MICPHONESCLSDA

6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32GPIO22GPIO21
6- posture sensorSCLSDA
power management ICSCLSDA

Power on / off:

Power on: Click the reset button
Shutdown: Double the reset button

datasheet


Example

Comparision Between Different Development Kits of M5


  • For details click here

  • Download chart click here



Description:

Hat SPK is an M5StickC compatible speaker, integrated PAM8303 amplifier (3w single channel type D power amplifier), High PSRR and differential inputs eliminate noise and rf interference, thus it has the characteristics of simple functions and high audio reproduction.

Product Feature:

  • Ultra-low EMI interference, 20dB better than FCC class B standard at 300MHz
  • Voltage 5 v power supply, with 4 Ω load power output 3 w, 10% of the total harmonic distortion.
  • Ultra-low noise without input
  • Power: 2.8V - 5.5V
  • Shortcut protection.

Package Included:


1 x M5StickC
1 x USB Type-C cable
 1 x SPK Hat







M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + 3W D Class Speaker PAM8303 Amplifier MP4/MP3 Compatible M5StickC See detail