5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control

5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control
5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control 5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control 5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control



Feature:

Product Name: Digital display embedded cabinet thermostat
Product model: XH-W2060
Temperature range: -19~99 °C
Control range: -19~99 °C
Temperature control accuracy: 1 °C
Measurement input: NTC10K waterproof probe L = 1 m
Refresh rate: 4 times / sec
Use environment: -30~60°C Humidity 20%-85%
Use environment: 12/24/220V optional
Output type: Relay output up to 10A
Appearance size: 77 x 62 x 34.5mm
Opening size: 71 x 29mm
Other functions: Power-off memory, state memory, temperature correction, delay start

CodeCode DescriptionSetting RangeFactory settingsUnit
P0Operating modeC/HC /
P1Hysteresis setting0.1-502°C
P2Temperature correction -9~90°C
P3Delayed start0-90Minute
P4High temperature alarm -19~9999°C

P0: Temperature control mode
C: Cooling mode H: Heating mode
 
P1: Difference setting
For example: P1=5
Cooling mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.
Heating mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again.
 
P2: Temperature correction
If the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26
 
P3: Delayed start
This function is used for compressor cooling. If it is used in a refrigerator freezer, this value must be set. According to the compressor back pressure, the value is usually set to 3-6 minutes.
 
P4: High temperature alarm
Set the high temperature alarm value. When the detected temperature exceeds this value, the screen flashes and the buzzer sounds an alarm.

Package includes:

5 x Digital display embedded cabinet thermostat
 
















5pcs 220V XH-W2060 Embedded Digital Thermostat Cabinet Freezer Cold Storage Thermostat Temperature Controller Temperature Control See detail