M5Stack® M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer with Watch Accessories
This is with watch accessories,If you like without watch accessories
Description:
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do? This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features:
- 5V DC power supply
- USB Type-C
- ESP32-based
- 4 MByte Flash
- 6-Axis IMU SH200Q/MPU6886
- Red LED
- Buzzer
- IR transmitter
- 1 Buttons, OLED(1.3 inch), 1 Reset
- 2.4G Antenna: Proant 440
- 80 mAh Lipo Battery
- Extendable Socket
- Grove Port
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython, for Arduino
ESP32 Features:
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth
- Hall sensor
- 10x capactive touch interface
- 32 kHz crystal oscillator
- PWM/timer input/output available on every GPIO pin
- SDIO master/salve 50MHz
- SD-card interface support
PinMap:
RED LED & IR Transmitter & BUTTON A & BUTTON B
GROVE PORT
MIC (SPM1423)
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
Package Included:
1 x M5StickC
1 x USB Type-C cable
1 x Watch Accessories
RED LED & IR Transmitter & BUTTON A & BUTTON B
| ESP32 | GPIO10 | GPIO9 | GPIO37 | GPIO39 |
| RED LED | LED PIN | |||
| IR Transmitter | Transmitter Pin | |||
| Button A | Button Pin | |||
| Button B | Button Pin |
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
| ESP32 | GPIO15 | GPIO13 | GPIO23 | GPIO18 | GPIO5 |
| TFT LCD | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS |
GROVE PORT
| ESP32 | GPIO33 | GPIO32 | 5V | GND |
| GROVE port | SCL | SDA | 5V | GND |
MIC (SPM1423)
| ESP32 | GPIO0 | GPIO34 |
| MICPHONE | SCL | SDA |
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
| ESP32 | GPIO22 | GPIO21 |
| 6-Axis posture sensor | SCL | SDA |
| power management IC | SCL | SDA |
Power on / off:
Power on: Click the reset button
Shutdown: Double the reset button
datasheet
Example
Comparision Between Different Development Kits of M5
Arduino
Package Included:
1 x M5StickC
1 x USB Type-C cable
1 x Watch Accessories
M5Stack® M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer with Watch Accessories See detail
