433MHz AC220V 2 Channel Wireless Remote Control Switch Module Motor Forward Reverse Controller AK-DJZFZ+AK-3000-3 3 Key Transmitter
Application areas:
The remote control elevator controller is a wireless control device widely used in garage door control, projection screen control, remote control curtain, powder wall machine and other fields. It has the advantages of easy installation, simple use, safety and reliability.
System composition:
1. Three-button remote control (function: rising - stop - drop)
2. Remote lift controller
Description:
Description:
Working frequency: 433MHZ
Operating voltage of remote controller: 12V23A (battery)
Controller operating voltage: AC 220V
Controller rated power: 1000W
Code method:
Press and hold the learning button for two seconds, the indicator light is off, press any button on the remote control, the indicator light flashes, and the learning is successful.
Instructions:
1. Be careful to choose the correct working voltage, otherwise it will damage the device and even be life-threatening.
2. The load power cannot exceed the contact capacity, and the correct approach should be less than 70% of the contact capacity.
Note:
1. There is high voltage inside the machine. Please do not disassemble it. Please install it under the guidance of professionals to avoid personal injury.
2. If the remote control distance is found to be shorter, please replace the remote control battery (size 12V 23A)
3. Please disconnect the input power during installation.
Package included:
1 x 433 MHz AC 220V 2 Channel Remote Switch Wireless Module
1 x Remote Control with battery
1 x 433 MHz AC 220V 2 Channel Remote Switch Wireless Module
1 x Remote Control with battery
433MHz AC220V 2 Channel Wireless Remote Control Switch Module Motor Forward Reverse Controller AK-DJZFZ+AK-3000-3 3 Key Transmitter See detail
